Attaching bottlecaps to Bows

[poshnpretty]

There are two ways(or more?) to attach bottlecaps to your bows and clippies!

http://poshnpretty.com/tutorials/new1/DSC09275.JPG

The first one is using a 5/8 ribbon, then a felt piece on top. You can apply glue on top of the felt and press it to the bow. You can also substitute with the 3/8 ribbon depending on the size of the bow

The second is super simple as you see. I used E6000 for second one and regular hotglue for first one.
Thanks

[hairproductjunkie]

Great idea! I've never thought to do that before. It looks much more secure to have the ribbon to wrap around the clip than just the e6000 glueing and wooden disk method that I've tried before.

Thank you! hug

[yaz_daz]

thanks... i havent done any bottlecaps yet but that will come in handy
when i auctully do some.

[Pretty Beaded Things]

Thanks for the idea.

[StitchezUtl]

that is awsome i would have never thought of doing that


Heather

[TheCraftyMe]

Cool! Cant wait to start trying this!

[tatortot]

Thank you I struggle with this.

[Didee54]

Thanks for sharing I was wondering how to do this.

[Idahomommyof4]

Thanks, I was wondering how to fill in that big gap!! Now I'll have to go try it out!!

[claycourtney]

Very good idea, would you use this method to attach to lined clip?

[aangel]

Thank you for the advice

[beccaflint]

Where is everyone getting their bottlecaps they are embellishing?

[mlhardison1]

I haven't done a lot of these, but I have also used an old button to fill the gap. Just glue any old button inside the bottlecap and then glue to bow.

[taylynn]

Thanks for sharing, I haven't put any bottlecaps on bows yet, but I was wondering what was the best way to do it.
Cheri

[IzzyB]

Was wondering how that was done. Thanks!!:3:

[shay0622]

Perfect!!! Thanks!

[RUBES]

THANKS...not sure why I hadn't thought of doing it like this before.

Cheers Rubes :)

[cag98a]

great idea...now i wont have to worry about them getting hot

[peggy]

Thanks so much.

[punkincreations]

Thanks for sharing

[erintaylor]

This looks a lot nicer than what I have been doing! I was cutting a piece of foam board and gluing it into the cap void and then gluing that together onto the center of my bows!